The cylinder head gasket is a very critical part for the engine. Although it has a very thin structure and is plastic, it is one of the parts that need attention. In general, the biggest cause of gasket burnout can be the dehydration of the engine. Or putting drinking water into the engine instead of antifreeze can cause this combustion. Let’s add that gasket burnout is a very high cost. At this point, we will try to convey to you that if you encounter a problem at this point, you will realize how to understand it. Even if you are a novice in understanding this, you can be sure that you will not have difficulty. Because there will be many radical changes in the engine. It is important to act carefully in order not to settle for this.
How to recognize gasket burnout
When your cylinder head gasket is burnt, there will be significant changes in the normal operation of the engine. Thanks to these changes, you can immediately realize that the gasket is burnt. Now let’s try to tell you what these changes are in order.
This will cause engine oil to mix in the coolant. To realize this, it will be enough to open the cover of the part where the water is. The oil will appear above the water. There may be significant changes in the color of the coolant. With this color, the water can become black like slime and thicken to the consistency of slime.
Just as oil can mix with water, water can also mix into the engine oil. You need to change the engine oil to realize this. While doing this, it will not be difficult for you to realize whether there is water in the oil in a short time. Of course, if you remove the oil with the machine, you cannot notice it, but when you remove it on a tray, the situation will be clearer. If your temperature gauge experiences sudden increases and decreases, this can be considered as one of the important symptoms of gasket burnout.
Gasket burnout will also prevent the vehicle from running stably. In the case known as roanti, the vehicle cannot run properly and it will be inevitable to experience fluctuations in its operation. Compressor leakage will also occur here. This will cause the vehicle to lose traction. In this case, there will often be a problem of misfiring and not eating gas. Since water will enter through the engine cover, water dripping and steam may appear in the exhaust section. These are all symptoms of the gasket cover burning. You can get information about the gasket by paying attention to these.
Many vehicle users can use their vehicle for long periods of time without realizing this. This, of course, will cause situations where bigger problems and costs will arise in the future. The biggest problem in this case is that the engine will be completely damaged. Engine life will gradually shorten due to the water entering. In this case, the oil that will mix with the engine water can clog the radiator and it will become completely unusable for a while. Even if you do not realize this situation yourself, if you go to your master and have the necessary maintenance done, you can prevent the problem from occurring or you can have it repaired at a lower cost in a short time by preventing its progress.