Engine reconditioning is not always a necessary procedure. In fact, most of the time, vehicle owners want to stay away from this process. The word meaning of this process means renewal of the engine. Of course, in order for this situation to occur, there must first be visible problems in the vehicle.
Let us state that these problems will not be easy to experience. Long-term use of the vehicle without maintenance, unnecessary strain or aging of parts will cause the need for this process. To explain briefly, we can show the engine reconditioning process as this. Let’s try to look at what to do during this process and the parts to be renewed together.
There are important operations to be performed in the engine reconditioning process. These operations need to be done by engine masters. They are also processes that require a lot of attention and should be done with minimum error.
If these operations are done correctly, there is not much of a problem. Now let’s look at the operations to be done together.
As the first operation, the upper part of the section known as the engine block needs to be cleaned. The same process is done for the cylinder head. These operations, i.e. cleaning, are carried out with a method called chip removal.
The pistons and piston bearings also need to be cleaned. If they cannot be cleaned, the recommended method is to replace them. After the cleaning process is over, the process is carried out until the arms of the pistons and the crank section overcome the adaptation process and work properly. Finally, the arms of the valves are lapped and the valves are lapped. The engine rectification process is completed with these processes.
This process is carried out in all engines known as internal combustion engines that serve on almost all highways. The reason for this is, as mentioned above, extremely long use and thousands of kilometers.
As a result, all vehicle engines consist of parts that have a certain lifespan. This refers to the process of renewing these parts and replacing parts. It is not a process that is needed for new vehicles.
However, as time passes, the rate of preference for this process will increase gradually. Let us state that it is a preferred method to use the vehicle for a while longer.
There is no specific time for engine rectification. This is a situation related to how the driver takes care of the vehicle and the durability of the vehicle.
In some vehicles, nothing happens despite going a million kilometers, while in others, this period is shorter. The material used has a great effect on this. It is not possible to give a very clear price for the cost of the process before the process is done. The calculation of which parts will be renewed and the prices of these parts are added to the labor price after the process.
The fewer the number of defective parts, the less the transaction amount will be. As the number of parts increases, the cost will automatically increase. Your master will give you clear information about this. We recommend that you do not believe too much in those who give prices before the process.